<div dir="ltr"><div><br></div><div>Hi Paul</div><div>The change you are suggesting is already there, perhaps a diagram may help clarify.  I have tried creating a simple network diagram and a brief configuration of both sides. Please take a look at the attached PDF.</div><div><br></div><div><br></div><div>Thanks, Best</div><div><br></div><div>Udai<br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, 23 Nov 2022 at 19:23, Paul Wouters <<a href="mailto:paul@nohats.ca">paul@nohats.ca</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">On Nov 23, 2022, at 00:03, Kumar P S Udai <<a href="mailto:kumar.udai@zuwissen.com" target="_blank">kumar.udai@zuwissen.com</a>> wrote:<br>
> <br>
> <br>
> Hi Paul<br>
> This was slightly confusing, because when I try to ping the HO(Europa) machin's private IP (192.168.1.1), I get a destination host unreachable message, all the while there was no change in the ESPout which remained at 0. However when I tried to ping a particular machine within the HO Lan such as 19.168.1.10, there is no reply, but the ESPout is going up 1K, 3K, 5K and so on...<br>
Add leftsourceip= with the gateways LAN IP, to make the ping work without specifying -I LANIP. If espout increases it looks that end is configured properly and you can look at fixing the other end.<br>
<br>
Paul</blockquote></div>