[Swan] getting traffic in 1 direction only

[Marc]

leftsubnet=192.168.x.0/24
rightaddresspool=192.168.x.1-192.168.x.10

Is this even possible?
 


> 
> This looks as to be expected for the ip of the ipsec client/peer:
> 
> :/etc/ipsec.d# ipsec showroute -4 192.168.x.3
> publicip publicgwip 192.168.x.3
> 
> However execute the same command for a local host I get the same result.
> :/etc/ipsec.d# ipsec showroute -4 192.168.x.15
> publicip publicgwip 192.168.x.15
> 
> Should this not be something mentioning the ethX adapter or so?
> 
> 
> https://libreswan.org/wiki/VPN_server_for_remote_clients_using_IKEv2_split_V
> PN
> 
> >
> > If I do a ping on the ipsec client, I can see it arrive on the destination
> > host with a tcpdump
> >
> > tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
> > listening on br0, link-type EN10MB (Ethernet), capture size 65535 bytes
> > 18:51:25.694274 IP 192.168.x.3 > 192.168.x.15: ICMP echo request, id 34,
> seq
> > 278, length 64
> > 18:51:26.677873 IP 192.168.x.3 > 192.168.x.15: ICMP echo request, id 34,
> seq
> > 279, length 64
> > 18:51:27.716212 IP 192.168.x.3 > 192.168.x.15: ICMP echo request, id 34,
> seq
> > 280, length 64
> > 18:51:28.722770 IP 192.168.x.3 > 192.168.x.15: ICMP echo request, id 34,
> seq
> > 281, length 64
> >
> > However when I do ping on the destination host to the ipset client I do
> not
> > even see this ping enter the interface of the host where libreswan is
> > running.
> >
> > How should I resolve this? I have tried a bit with arping and
> > enabling/disabling proxy arp on the host interface, but nothing seems to
> > work
> > (iptables is off and forwarding is on)
> >
> >
> > _______________________________________________
> > Swan mailing list
> > Swan at lists.libreswan.org
> > https://lists.libreswan.org/mailman/listinfo/swan
> _______________________________________________
> Swan mailing list
> Swan at lists.libreswan.org
> https://lists.libreswan.org/mailman/listinfo/swan