[Swan] Multiple Traffic Selectors on one SPD

[Jonathan Sadler]

Ok.  Is port ranging supported in a traffic selector?

Jonathan Sadler

From: Paul Wouters <paul at nohats.ca>
Sent: Tuesday, April 12, 2022 10:50 AM
To: Jonathan Sadler <JSadler at infinera.com>
Cc: Swan at lists.libreswan.org
Subject: Re: [Swan] Multiple Traffic Selectors on one SPD

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

This is currently not supported unfortunately but planned for libreswan 4.8.

Paul
Sent using a virtual keyboard on a phone


On Apr 12, 2022, at 09:06, Jonathan Sadler <JSadler at infinera.com<mailto:JSadler at infinera.com>> wrote:

Hi,

Can you provide an example of how to have two Traffic Selectors in the same SPD?  We are interoperating with a system that is wanting to use the same SPD for multiple Traffic Selectors.  Right now we need to establish two separate SPDs to connect.

Thanks!

Jonathan Sadler
_______________________________________________
Swan mailing list
Swan at lists.libreswan.org<mailto:Swan at lists.libreswan.org>
https://lists.libreswan.org/mailman/listinfo/swan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.libreswan.org/pipermail/swan/attachments/20220412/bc9b5585/attachment-0001.htm>