[Swan] Netkey not loading with libreswan
Krueger, Francis
fkrueger at sscinc.com
Fri Jun 12 21:31:33 UTC 2020
I fixed this, disregard.
Two ipsec.conf files one in /etc/ the other in /etc/ipsec.d/
Thanks.
From: "Krueger, Francis" <fkrueger at sscinc.com>
Date: Friday, June 12, 2020 at 5:07 PM
To: "swan at lists.libreswan.org" <swan at lists.libreswan.org>
Subject: Netkey not loading with libreswan
Verifying installed system and configuration files
Version check and ipsec on-path [OK]
Libreswan U3.15/K(no kernel code presently loaded) on 2.6.32-754.30.2.el6.x86_64
Checking for IPsec support in kernel [FAILED]
The ipsec service should be started before running 'ipsec verify'
Pluto ipsec.conf syntax [OK]
Hardware random device [N/A]
Checking rp_filter [OK]
Checking that pluto is running [FAILED]
Checking 'ip' command [OK]
Checking 'iptables' command [OK]
Checking 'prelink' command does not interfere with FIPS [PRESENT]
Checking for obsolete ipsec.conf options [OK]
Opportunistic Encryption [DISABLED]
ipsec verify: encountered 3 errors - see 'man ipsec_verify' for help
Jun 12 21:05:57 lontsvm19003 ipsec__plutorun: Starting Pluto subsystem...
Jun 12 21:05:57 lontsvm19003 ipsec__plutorun: !pluto failure!: exited with error status 139 (signal 11)
Jun 12 21:05:57 lontsvm19003 ipsec__plutorun: restarting IPsec after pause...
Jun 12 21:06:17 lontsvm19003 kernel: pluto[22470]: segfault at 3ff8 ip 00007fd37712593c sp 00007ffca1989e48 error 4 in libc-2.12.so[7fd3770aa000+18b000]
Any help appreciated.
More information about the Swan
mailing list