[Swan] rightsubnets

[Ivan Kuznetsov]

Hmm, I remember I had similar problem with earler version of libreswan.
But my current configuration mostly has ikev1 peers. Few ikev2 peers 
config has just one left/rightsubnet, so I'm not sure

27.09.2018 17:59, Satavee Junwana пишет:
>   I also have the same problem for ikev2.,
> Libreswan initiate phase1 for each submet. But there has no problem wth 
> ikve1 ... noted:libreswarn-3.26
> Sent via Iphone
> 
> On 27 Sep 2018, at 21:47, J Kephart <jkephart at safetynetaccess.com 
> <mailto:jkephart at safetynetaccess.com>> wrote:
> 
>>
>>> What is right way to put in config r amore than one subnet?
>>> On some forums i find:
>>> rightsubnets={172.16.1.0/24 <http://172.16.1.0/24> 192.168.3.0/24 
>>> <http://192.168.3.0/24>}
>>> rightsubnets={172.16.1.0/24,192.168.3.0/24 
>>> <http://172.16.1.0/24,192.168.3.0/24>}
>>> rightsubnets={172.16.1.0/24,192.168.3.0/24, 
>>> <http://172.16.1.0/24,192.168.3.0/24,>}
>>> What variant right?
>>>
>>
>> Eugeniy, use the comma-separated format.  That's the one that worked 
>> for us.
>>
>> -- Jim
> 
> 
> _______________________________________________
> Swan mailing list
> Swan at lists.libreswan.org
> https://lists.libreswan.org/mailman/listinfo/swan
> 

-- 
С уважением, Иван Кузнецов
Руководитель технического отдела

Компания "СОЛВО"
+7(812)60-60-555
+7(495)66-83-003
+7(921)740-72-61
http://www.solvo.ru