[Swan] Pluto not running?

[Charles Van Dusen]

Hi Paul,

Thanks for the quick response. I am a newb to gdb, but here is the result:

(gdb) bt
#0  __pthread_self () at pthread_self.c:25
#1  0x00445880 in add_state_prefix (buf=0x7e800168) at /home/pi/libreswan-3.22/programs/pluto/log.c:151
#2  0x004b8744 in lsw_passert_fail (file=0x50f40c "lswlog.c", line=line at entry=43, func=0x50f3c0 <__func__.9160> "dest", fmt=0x50c224 "%s")
    at /home/pi/libreswan-3.22/lib/libswan/lsw_passert_fail.c:29
#3  0x004b8fb8 in dest (log=0x7e800168) at /home/pi/libreswan-3.22/lib/libswan/lswlog.c:43
#4  0x004b912c in lswlogs () at /home/pi/libreswan-3.22/lib/libswan/lswlog.c:158
#5  0x004b8754 in lsw_passert_fail (file=0x50f40c "lswlog.c", line=line at entry=43, func=0x50f3c0 <__func__.9160> "dest", fmt=0x50c224 "%s")
    at /home/pi/libreswan-3.22/lib/libswan/lsw_passert_fail.c:30
#6  0x004b8fb8 in dest (log=0x7e8005d0) at /home/pi/libreswan-3.22/lib/libswan/lswlog.c:43
#7  0x004b912c in lswlogs () at /home/pi/libreswan-3.22/lib/libswan/lswlog.c:158
#8  0x004b8754 in lsw_passert_fail (file=0x50f40c "lswlog.c", line=line at entry=43, func=0x50f3c0 <__func__.9160> "dest", fmt=0x50c224 "%s")
    at /home/pi/libreswan-3.22/lib/libswan/lsw_passert_fail.c:30
#9  0x004b8fb8 in dest (log=0x7e800a38) at /home/pi/libreswan-3.22/lib/libswan/lswlog.c:43
#10 0x004b912c in lswlogs () at /home/pi/libreswan-3.22/lib/libswan/lswlog.c:158
#11 0x004b8754 in lsw_passert_fail (file=0x50f40c "lswlog.c", line=line at entry=43, func=0x50f3c0 <__func__.9160> "dest", fmt=0x50c224 "%s")
    at /home/pi/libreswan-3.22/lib/libswan/lsw_passert_fail.c:30
#12 0x004b8fb8 in dest (log=0x7e800ea0) at /home/pi/libreswan-3.22/lib/libswan/lswlog.c:43
#13 0x004b912c in lswlogs () at /home/pi/libreswan-3.22/lib/libswan/lswlog.c:158
#14 0x004b8754 in lsw_passert_fail (file=0x50f40c "lswlog.c", line=line at entry=43, func=0x50f3c0 <__func__.9160> "dest", fmt=0x50c224 "%s")
    at /home/pi/libreswan-3.22/lib/libswan/lsw_passert_fail.c:30
#15 0x004b8fb8 in dest (log=0x7e801308) at /home/pi/libreswan-3.22/lib/libswan/lswlog.c:43

Does that help? Anything else I can do to provide more helpful info?

-----Original Message-----
From: Paul Wouters [mailto:paul at nohats.ca] 
Sent: Wednesday, October 25, 2017 12:48 PM
To: Charles Van Dusen <charlie at imdgn.com>
Cc: swan at lists.libreswan.org
Subject: Re: [Swan] Pluto not running?

On Wed, 25 Oct 2017, Charles Van Dusen wrote:

> I have another new install on a raspberry pi (Raspbian stretch). With Version 3.22 I am unable to start ipsec:

>   Process: 3407 ExecStart=/usr/local/libexec/ipsec/pluto --leak-detective --config /etc/ipsec.conf --nofork (code=killed,
> signal=SEGV)

Looks like we crashed. Do you have gdb there, then you can run:

ipsec _stackmanager start
gdb /usr/libexec/ipsec/pluto
run --config /etc/ipsec.conf --nofork --stderrlog

and after it crashes:

bt

Paul