[Swan] plicbd pluto[6857]: reapchild failed with errno=10 No child processes

[how at atomit.pl]

Hello, 

I'm trying to set ipsec tunnel. When I start service I have this message in log:
Feb  1 20:29:49 plicbd pluto[6857]: loading secrets from "/etc/ipsec.secrets"
Feb  1 20:29:49 plicbd pluto[6857]: no secrets filename matched "/etc/ipsec.d/*.secrets"
Feb  1 20:29:49 plicbd pluto[6857]: initiating all conns with alias='siemianowice'
Feb  1 20:29:49 plicbd pluto[6857]: initiating all conns with alias='borucza'
Feb  1 20:29:49 plicbd pluto[6857]: reapchild failed with errno=10 No child processes


# ipsec --status
000 using kernel interface: netkey
000 interface lo/lo ::1 at 500
000 interface lo/lo 127.0.0.1 at 4500
000 interface lo/lo 127.0.0.1 at 500
000 interface eth0/eth0 xx.xx.xx.xx at 4500
000 interface eth0/eth0 xx.xx.xx.xx at 500
000  
000  
000 fips mode=disabled;
000 SElinux=disabled
000  
000 config setup options:
000  
000 configdir=/etc, configfile=/etc/ipsec.conf, secrets=/etc/ipsec.secrets, ipsecdir=/etc/ipsec.d, dumpdir=/var/run/pluto/, statsbin=unset
000 sbindir=/usr/sbin, libexecdir=/usr/lib/ipsec
000 pluto_version=3.16, pluto_vendorid=OE-Libreswan-3.16
000 nhelpers=-1, uniqueids=yes, perpeerlog=no, shuntlifetime=900s, xfrmlifetime=300s
000 ddos-cookies-treshold=50000, ddos-max-halfopen=25000, ddos-mode=auto
000 ikeport=500, strictcrlpolicy=no, crlcheckinterval=0, listen=<any>, nflog-all=0
000 secctx-attr-type=<unsupported>
000 myid = (none)
000 debug none


Can you help my with this? 

---
Pozdrawiam 
Łukasz Wojton 

www.atomIT.pl - programowanie i projekty informatyczne, serwis komputerowy, profesjonalna obsługa firm