[Swan] R: R: R: Installing klips

Antonio Scattolini antonio.scattolini at atpesercizio.it
Tue Mar 17 16:12:38 EET 2015


My bad,
I had misconfigured eth1!
(I wrote:

auto eth1
iface eth0 inet static

instead of

iface eth1 inet static)

Now everything is working fine. VPN is up and running.
Thank you for your support.

Antonio

-----Messaggio originale-----
Da: Paul Wouters [mailto:paul at nohats.ca]
Inviato: martedi 17 marzo 2015 13.40
A: Antonio Scattolini
Cc: swan at lists.libreswan.org
Oggetto: Re: R: R: [Swan] Installing klips


On Tue, 17 Mar 2015, Antonio Scattolini wrote:

> Netkey (protostack=netkey) has:
> Pluto listening for IKE on udp 500                     [OK]
> Pluto listening for IKE/NAT-T on udp 4500              [OK]

> Klips (protostack=klips) has:
> Pluto listening for IKE on udp 500                     [FAILED]
> Pluto listening for IKE/NAT-T on udp 4500              [DISABLED]

Looks like you ran ipsec verify without starting the ipsec service on
the klips check?

Paul


More information about the Swan mailing list