[Swan] Something broken in the el6.x86_64 rpm in the repo
Paul
paul at nohats.ca
Sun Sep 14 17:38:20 EEST 2014
Yes, they contain three patches that went in post 3.10
Sent from my iPhone
> On Sep 14, 2014, at 2:53, Nick Howitt <nick at howitts.co.uk> wrote:
>
> So the binaries are a different version than the released tarball?
>
>> On 14/09/2014 01:00, Paul wrote:
>> That would be the patch that fixes the order or load and listen ? I wonder why it broke your setup
>>
>> Sent from my iPhone
>>
>> On Sep 13, 2014, at 12:34, Nick Howitt <nick at howitts.co.uk> wrote:
>>
>>> Paul,
>>>
>>> After 3.10 was released you did not immediately compile the binaries so I compiled my own with the following mini script:
>>>
>>> #!/bin/bash
>>> Version=3.10
>>> TARGET=x86_64
>>> cd $HOME/rpmbuild/SOURCES
>>> wget https://download.libreswan.org/libreswan-$Version.tar.gz --no-check-certificate
>>> tar zxf libreswan-$Version.tar.gz libreswan-$Version/packaging/rhel/6/libreswan.spec
>>> rpmbuild -bb --target=$TARGET --clean --quiet libreswan-$Version/packaging/rhel/6/libreswan.spec
>>> rm -rf libreswan-$Version/
>>>
>>>
>>> It installed and worked correctly. As I had your repo installed and enabled, your version installed itself a few days ago and broke my connections:
>>>
>>> Sep 13 16:54:03 server pluto[32481]: added connection description "MumIn"
>>> Sep 13 16:54:03 server pluto[32481]: | entering aalg_getbyname_ike()
>>> Sep 13 16:54:03 server pluto[32481]: connection PaulIn must specify host IP address for our side
>>> Sep 13 16:54:03 server pluto[32481]: attempt to load incomplete connection
>>>
>>>
>>> and
>>>
>>> Sep 13 16:54:04 server pluto[32481]: packet from 88.104.27.206:500: initial Main Mode message received on 82.19.158.192:500 but no connection has been authorized with policy=PSK
>>> Sep 13 16:54:06 server pluto[32481]: packet from 82.30.103.217:500: initial Main Mode message received on 82.19.158.192:500 but no connection has been authorized with policy=PSK
>>> Sep 13 16:54:09 server pluto[32481]: packet from 82.30.103.217:500: initial Main Mode message received on 82.19.158.192:500 but no connection has been authorized with policy=PSK
>>> Sep 13 16:54:12 server pluto[32481]: packet from 88.104.27.206:500: initial Main Mode message received on 82.19.158.192:500 but no connection has been authorized with policy=PSK
>>> Sep 13 16:54:15 server pluto[32481]: packet from 88.104.27.206:500: initial Main Mode message received on 82.19.158.192:500 but no connection has been authorized with policy=PSK
>>>
>>> This is where I have left=%defaultroute and right=%any (bug 86), but this was fixed and in the tarball I compiled from but does not work with your binary. Do you know why?
>>>
>>> Regards,
>>>
>>> Nick
>>> _______________________________________________
>>> Swan mailing list
>>> Swan at lists.libreswan.org
>>> https://lists.libreswan.org/mailman/listinfo/swan
>
>
>
>
> This email is free from viruses and malware because avast! Antivirus protection is active.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.libreswan.org/pipermail/swan/attachments/20140914/499b242d/attachment.html>
More information about the Swan
mailing list