[Swan-dev] _parse_pam_auth_rsp: AUTH FAILURE

[Balaji Thoguluva]

Thanks Paul. Do you have some reference/link to the known issue so I can
get more information?

On Sun, Nov 29, 2020 at 6:00 PM Paul Wouters <paul at nohats.ca> wrote:

> On Nov 29, 2020, at 17:07, Balaji Thoguluva <tbbalaji at gmail.com> wrote:
> >
> > 
> > Hi Folks,
> >
> > I am using Linux Libreswan 3.25 (netkey) on 4.14.35.
> >
> > The very first time, IKEv2/IPsec tunnel gets established correctly. I
> establish the tunnel by triggering a RADIUS packet matching the above
> parameters and this packet triggers the tunnel from Libreswan to the other
> end.
> >
> > Now I tear down the tunnel from the other end and I verified there is no
> tunnel/SA's in Libreswan. Now if I again attempt to establish the same
> tunnel by triggering the RADIUS packet, then the tunnel attempt from
> Libreswan fails.
>
> That is a known bug. I believe it was fixed in 3.27.
>
> Paul
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.libreswan.org/pipermail/swan-dev/attachments/20201129/044b6a44/attachment.html>