[Swan-dev] reference file bugs?

[D. Hugh Redelmeier]

When I ran the test suite last night, I found three failures that look
like obsolete reference logs.  And one failure of the sanitizers.

Could whoever is responsible fix the reference logs and the sanitizer?

Note: I was not looking at all test failures.  There are likely other
places these problems show up.

> testing/pluto/addconn-02 failed east:output-different
testing/pluto/addconn-02/OUTPUT/east.console.diff
bad reference file
+conn: "test" redirect-to=<unset>
+conn: "test" accept-redirect-to=<unset>

> testing/pluto/impair-08-ikev2-key-length-attribute failed west:output-different
testing/pluto/impair-08-ikev2-key-length-attribute/OUTPUT/west.console.diff
bad reference file
-002 "aes128" #5: AUTH response contained the error notification NO_PROPOSAL_CHOSEN
+002 "aes128" #5: IKE_AUTH response contained the error notification NO_PROPOSAL_CHOSEN

-002 "aes128" #12: AUTH response contained the error notification NO_PROPOSAL_CHOSEN
+002 "aes128" #12: IKE_AUTH response contained the error notification NO_PROPOSAL_CHOSEN

> testing/pluto/ikev2-redirect-01-global failed east:output-different
testing/pluto/ikev2-redirect-01-global/OUTPUT/east.console.diff
bad reference logs
-000 global-redirect=on, global-redirect-to=192.1.3.33
+000 global-redirect=yes, global-redirect-to=192.1.3.33

> testing/pluto/ikev2-redirect-06-roadwarriors failed east:output-different north:output-different road:output-different west:output-different
testing/pluto/ikev2-redirect-06-roadwarriors/OUTPUT/east.console.diff
bad sanitization

-	proto esp spi 0xSPISPI reqid REQID mode tunnel
+	proto esp spi 0x3232f2a3 reqid 16393 mode tunnel

-	aead rfc4106(gcm(aes)) 0xENCAUTHKEY 128
+	aead rfc4106(gcm(aes)) 0x90982f7c8ecd04b8706fd7c52127f4d024156158ddbc056983e8af3a2c55145e540ac637 128

-	proto esp spi 0xSPISPI reqid REQID mode tunnel
+	proto esp spi 0x8c894e26 reqid 16393 mode tunnel